LG -P895 Service Manual page 22

LG-P895 Product SPEC
Rx Adjacent Channel
Rejection
10) GPS receiver specification
10) GPS receiver specification
Item
Receive Frequency
Minimum Sensitivity
11) Current consumption
11) Current consumption
WCDMA
Only
GSM
Only (Paging=5 period)
** Test condition for Standby current consumption should be as below.
: Measurement time 1hr, with Agilent & CMT JIG
12) Battery life time
12) Battery life time
WCDMA
GSM
LGE Internal Use Only
ACR ≥ 16dB@6.5Mbps, ACR ≥ 13dB@13Mbps,
ACR ≥ 11dB@19.5Mbps, ACR ≥ 8dB@26Mbps,
ACR ≥ -1dB@58.5Mbps, ACR ≥ -2dB@65Mbps
※ACR shall be measured by setting the desired signal's strength
Sensitivity specified in min input sensitivity
1 satellite ≥-142dBm, 7 satellites ≥ -147dBm at coarse time aiding
Stand by
Bluetooth Off Bluetooth Connected
4.5 mA under
(DRX=1.28)
4.5 mA under
(Paging=5 period)
Stand by
460 hours over
(DRX = 1.28)
460 hours over
(Paging Period = 5)
PER ≤ 10%,
ACR ≥ 4dB@39Mbps, ACR ≥ 0dB@52Mbps
3 dB above the rate-dependent
Specification
1574.42 MHz ~ 1576.42 MHz
6 mA under
(DRX=1.28)
6 mA under
Voice Call
8 hours over
(TX = 12dBm,
Low Pwr mode)
7 hours over
(TX Level = Max)
- 22 - Copyright © 2012 LG Electronics. Inc. All right reserved.
2. PERFORMANCE
Voice Call VT
270 mA under
NA
(Tx=12dBm)
340 mA under
(Tx=Max)
VT
NA
Only for training and service purposes