Lge Internal Use Only - LG -E510 Service Manual

3. TECHNICAL BRIEF
3.12.2.3. HS-USB
The High-Speed USB module contains an embedded UTMI+ core with a built-in transceiver eliminating the
need for an external PHY. The HS-USB port is a standard 4-pin interface that connects directly to the USB
connector (USBPHY_DP, USBPHY_DN, USBPHY_ID and USBPHY_VBUS). Two additional pins are required for
PHY operations which include an external reference resistor pin (USBPHY_REXT) and a USB system clock pin
which the USB PHY uses to lock its internal PLL (SYS_CLK)
Figure. HS-USB connections and architecture

LGE Internal Use Only

- 48 - Copyright © 011 LG Electronics. Inc. All right reserved.
Only for training and service purposes