Calibration; General Description; Requirement - LG -E510 Service Manual

10. CALIBRATION

10.1 General Description

This document describes how to install and use the RF calibration software(Tachyon) of LG 3G mobile phone with
Qualcomm Chipsets.

10.2 Requirement

Requirements for RF calibration of LGE mobile phone are outlined in the following sections.
10.2.1 Hardware
1) Desktop or laptop computer
2) Agilent 8960 Series 10 (E5515C) Testset
3) GPIB card and cable for communicating with Agilent 8960 Series 10 Testset
4) Power Supply, or 4V battery, and power cable for putting power on the mobile phone.
5) Data(USB or UART) cables for connecting the mobile phone to computer's serial port
6) RF cable
10.2.2 driver
1) National Instruments GPIB & VISA driver
2) LGE mobile USB driver
3) Data cable driver(optional)
10.2.3 System
1) Windows XP SP2 or better
2) RAM 512M or grater
3) HDD 1GB of available space
LGE Internal Use Only - 178 - Copyright © 011 LG Electronics. Inc. All right reserved.
10. CALIBRATION
Only for training and service purposes