Table of Contents
Advertisement
11.3.6 UI
12.3.6
-. LG_UI_Ad6500_002.dll : ADI Model UI Dll.
11.3.7 Multi_HK
12.3.7
-. Registration File For System Setting.
1. Connect as Fig 6-2(RS232 serial cable is connected between COM port of PC and MON port of TEST JIG,
in general)
2. Set the Power Supply 4.0V
3. Set the 3
rd
, 4
th
of DIP SW ON state always
4. Press the Phone power key, if the Remote ON is used, 1
11.4 Procedure
12.4
1. Copy the file to C:\Cm_Gsm_Multi
2. Copy the files of((Windows XXX)MFCD DLL, vsflex7l_ocx_regist to C:\Cm_Gsm_Multi\dll,ocx
3. Select MFCD DLL of your computer OS
4. Click on "vsflex7l_ocx_regist"
5. Click on "Multi_HK reg"
6. Connect as Fig 11-2 (RS232 serial cable is connected between COM port of PC, in general.)
7.. Run HK_40exe to start calibration.
8. Click " Logic Operation" of "SETTING" menu bar
Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
11. AUTO CALIBRATION
st
ON state
- 147 -
12.AUTO CALIBRATION
LGE Internal Use Only
Advertisement
Table of Contents
