Table of Contents
Advertisement
●
Do not insert au Nano IC Card 04 or
microSD memory card directly into the au
Nano IC Card 04 tray slot or microSD
memory card tray slot, nor insert any other
objects into these slots.
●
Note that covering the proximity/light
sensor with your finger, or putting a sticker
over the sensor may hinder the sensor from
responding to ambient light and functioning
properly.
●
Do not put a sticker etc. on the proximity/
light sensor. Doing so may cause the
sensor to malfunction and make the display
always turned off when a call comes in or
during a call and operation may not be
possible.
■ Touch panel
●
Use your finger to operate the touch panel.
Do not use ballpoint pens, pencils or other
sharp-pointed objects. Using such objects
not only hinder correct operation of the
touch panel, but also may cause scratching
or damage to the display.
●
Putting stickers or sheets (e.g.
commercially available protective films,
peep prevention sheets) on the display
might hinder correct operation of the touch
panel.
●
If the display surface is dirty or wet with
sweat or water, it may not function
correctly. In such case, wipe the display
surface with a dry, soft cloth.
●
When carrying the product in your pocket or
bag, take care not to put the touch panel
close to metal or other conductive
materials, as it might cause false operation
of the touch panel.
39
Advertisement
Table of Contents
