Software Updates - Kurzweil sp5-8 Service Manual

Software Updates

1. Go to www.kurzweil.com and follow the links to download the latest software version
Note: The Operating System and Object files are combined in one file type (.KUF).
2. Connect a USB cable from a computer to the USB port on the SP5-8 rear panel.
3. When
4. You should see
5. Check the computer desktop and verify that the SP5-8 USB device/window is present.
6. Press the Param / Chan Down button. The display shows,
7. Press the Next button. The display shows
8. The display shows the following message:
9. Drag and drop the update file(s) directly to the SP5-8 icon on the computer desktop.
Note: Be sure to always read the downloaded release notes and installation instructions in
case they have changed since this manual was written.
10. Press the Next button on the SP5-8 to begin the update. The display shows:
11. When the update is complete, the display shows:
12. Unmount or "safely remove" the SP5-8 icon from your computer.
13. Turn the SP5-8 off, then on again to test the software updates.
to your computer desktop.
appears in the display, release the Shift button.
(This should appear on the desktop as an icon or window.)
.
in the display.
. Press the Next button again.
Troubleshooting & Maintenance
Software Updates
.
.
.
5-3