Double Press Buttons; Pitch And Mod Wheels - Kurzweil sp5-8 Service Manual

Double Press Buttons

Certain buttons when simultaneously pressed with another button provide secondary functions.
These are called double press buttons. A description of each of the SP5-8's double press buttons
begins below.
Reset Transposition—Simultaneously press the Transpose – and Transpose + buttons to restore
the current program or setup to no transposition.
Value Jump—Simultaneously press the Previous and Next buttons to jump to the next group of
items (Program, Setup, and Edit Setup Mode).
Paramenter Jump—Simultaneously press the Chan / Param Up and Down buttons to jump a
specific parameter (Edit Setup Mode only).
MIDI Program Change—Simultaneously press the Voices and Mallets category buttons to enter
the MIDI Program Change Function page and send MIDI Program changes to any sound module
connected in a MIDI chain to the SP5-8.
Program Demo—Simultaneously press the Hybrid and Misc category buttons to enter Program
Demo Mode and play a demo song for the current Program.
Demo—Simultaneously press the User and All category buttons to enter Demo Mode and listen
to a demo sequence.
Panic—Simultaneously press the Keypad and Enter category buttons to send an All Notes/All
Controllers Off message to the SP5-8 and connected modules.

Pitch and Mod Wheels

Pitch and Mod wheels—Use the Pitch wheel to vary the pitch up or down. Assign the Mod
wheel to a parameter that alters some aspect of the sound (e.g., vibrato, filter depth) when
changed.
Introduction
Front Panel Features
1-5