Graco Magnum X5 Manual page 15

9. Move Prime/Spray Valve to PRIME.
10. Plug sprayer in a grounded outlet.
11. Push pump priming button two times.
X5 and X7 Only
12. Turn power switch ON.
13. Align setting indicator with Prime/Clean setting on
Pressure Control knob until pump starts, page 13.
14. When sprayer starts pumping, water and air bub-
bles will be purged from system. Allow fluid to flow
out of prime tube, into waste pail, for 30 to 60 sec-
onds.
15. Turn power switch OFF.
332689D
ti9346a
ti15972a
ti5580a
ti9718a
ti2810a
16. Transfer suction tube to paint pail and submerge
suction tube in paint.
17. Turn power switch ON.
PAINT
ti9653a
ti5580a
Setup
15