Dell Vostro V130 Service Manual page 52

Installing The Card-Reader Board
NOTE: To remove or locate the card-reader board, see
1. Place the card-reader board in the card-reader board bay.
2. Connect card-reader cable to the system board.
3. Replace and tighten the screws that secure the card-reader board to the computer.
4. Install the
5. Install the battery.
6. Install the
7. Install the
8. Follow the procedures in
52
Downloaded from www.Manualslib.com
audio and hard drive assembly.
base cover.
Secure Digital (SD) card.
After working inside your
manuals search engine
Removing The Card-Reader
computer.
Board.