11. Remove the speaker from the computer.
NOTE: To replace the speaker, see
Installing The Speaker
NOTE: To remove or locate the speaker, see
1.
Place the speaker into its slot on the computer.
2.
Tighten the screws that secure the speaker to the computer.
3.
Route the speaker cable back into its routing guide on the computer.
4.
Secure the speaker cable to computer, using the cloth tapes provided.
5.
Install the
6.
Install the
7.
Install the battery.
8.
Install the
9.
Install the
10. Follow the procedures in
26
Downloaded from
www.Manualslib.com
Installing The
audio board and the hard
drive.
display closure
sensor.
base
cover.
Secure Digital (SD)
card.
After Working Inside Your
manuals search engine
Speaker.
Removing The
Speaker.
Computer.