Display - Miele CVA 3660 Operating And Installation Instructions

Display

Settings: Customising your machine
There are four programmable levels:
Level Hardness
(machine) (local water)
Hardness 1 1 (soft)
Hardness 2 1 (soft)
Hardness 3 2 (medium)
Hardness 4 3 (hard)
4 (very hard)
^ Touch the right arrow sensor until "Settings" is highlighted
and touch the OK sensor.
^ Touch the right arrow sensor until "Water hardness" is
highlighted and touch the OK sensor.
^ Touch one of the arrow sensors to set the water hardness
and touch the OK sensor.
A tick will appear as confirmation of the current setting.
You can adjust both the contrast and the brightness of the
display:
^ Touch the right arrow sensor until "Settings" is highlighted
and touch the OK sensor.
^ Touch the right arrow sensor until "Display" is highlighted
and touch the OK sensor.
^ Touch one of the arrow sensors to select "Contrast" or
"Brightness" and touch the OK sensor.
^ Touch one of the arrow sensors to set the contrast lower or
higher or the brightness lighter or darker.
^ Touch the OK sensor to save the setting.
°d mmol/l
0 - 3 0 - 0.6
4 - 7 0.7 - 1.3
7 - 14 1.3 - 2.5
14 - 21 2.5 - 3.8
above 21 above 3.8
Water
through-flow
in litres
approx. 200
approx. 130
approx. 90
approx. 60
39