Making Coffee; Switching On - Miele CVA 3660 Operating And Installation Instructions

Switching on

Important: the water piping must be rinsed through every
day and the machine cleaned thoroughly before the first
drink of coffee is prepared. Rinsing will take place
automatically if the Automatic rinsing programme option
has been set to "On" and the machine is cold. Hot water
will run out of the spout into the drip tray once the machine
has heated up.
If the Rinsing programme option has been set to "Off",
select "Rinsing" in the display to rinse out the system (see
"Cleaning and care").
To switch the machine on:
^ touch the On/Off sensor s.
The following message will then appear:
If the automatic rinsing programme option has been set to
"On" (factory default setting), the following will appear after
the machine has heated up:
Water will run out of the spout.
You will hear the capsule carousel moving into position.
The main menu will then appear in the display:
COSI
K1 K2
Heating-up phase
Rinsing
K3 K4 K5 L

Making coffee

o Espresso
o n G k C
19