Automatic Rinsing - Miele CVA 3660 Operating And Installation Instructions

Settings: Customising your machine

Automatic rinsing

34
To remove any coffee grounds from the system, the water
piping must be rinsed through before the first drink of the day
is prepared. If programme option "Automatic rinsing" is set to
"On", rinsing will start automatically when the machine is
switched on and cold. This will also pre-heat the system
because hot water is used for the rinse process. A message
will appear in the display to let you know what is happening.
The machine will also run an automatic rinse before it
switches off, if it has been used to prepare a drink.
To prevent water from running into the drip tray,
always place an empty cup under the spout
before making the first drink.
^ Touch the right arrow sensor until "Settings" is highlighted
and touch the OK sensor.
^ Touch the right arrow sensor until "Automatic rinsing" is
highlighted and touch the OK sensor.
^ Touch one of the arrow sensors to select "On" or "Off" and
touch the OK sensor.
A tick will appear as confirmation of the current setting.
It is a good idea to set this option to "On" so that
the rinse process cannot be forgotten.