6
Put the shaving heads back into the shaving
head holder.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the projections
in the shaving-head holder.
7
Place the retaining rings back onto the shaving
head holder (1) and turn them clockwise (2).
Note: Hold the shaving head holder in your hand
when you reinsert the shaving heads and reattach the
retaining rings. Do not place the shaving head holder on
a surface when you do this, as this may cause damage.
8
Reattach the shaving head holder to
the bottom part of the shaving unit.
Cleaning the click-on attachments
Cleaning the beard styler attachment
(specific types only)
Clean the beard styler attachment every time you
have used it.
1
Pull the comb off the beard styler attachment.
2
Rinse the beard styler attachment and the comb
separately under a hot tap for some time.
3
Carefully shake off excess water and let
the beard styler attachment and comb dry.
4
Lubricate the teeth of the beard styler
attachment with a drop of sewing machine
oil every six months.
ENGLISH
23