Brother GT-3 Series Instruction Manual page 11

No. Name
10 Vertical Position
11 Centering
12 Vertical Centering
13 Horizontal Centering
14 Bring to Foreside
15 Bring to Backside
16 Delete
With the uppermost part of Platen Frame set to 0, this function enables you to
display and change a vertical position of an object.
When you drag the object to move it elsewhere, the corresponding value
changes accordingly.
This function positions an object at the center of platen in both vertical and
horizontal directions.
This function positions an object at the center of platen in a vertical direction.
This function positions an object at the center of platen in a horizontal direction.
It brings an object to the foreside.
Among those objects that overlap with the selected object, this function moves
one object to the foreside position in front of the object which is currently
positioned at the foremost side. However, no change will take place if no object
overlaps with each other.
It brings an object to the backside.
Among objects that overlap with the selected object, this function moves one
object to the backside position behind the object which is currently positioned at
the rearmost side. However, no change will take place if no object overlaps with
each other.
Click on the recycle bin icon to delete any object.
3-5
Screen display and functions
Function