Speaker Menu - Yamaha RX-V1900 Owner's Manual

Customizing this unit (MANUAL SETUP)

1 SPEAKER MENU

Use this feature to manually adjust the basic speaker
settings. Most of the "SPEAKER MENU" parameters are
set automatically when you run the automatic setup.
y
• Set "TEST TONE" to "ON" (page 70) to output the test tone for
the "CONFIG", "LEVEL" and "DISTANCE" settings.
• If your subwoofer can adjust the output volume and the
crossover frequency, set the volume to about half way (or
slightly less) and set the crossover frequency to the maximum.
■
Speaker configurations A)CONFIG
LFE/bass out LFE/BASS OUT
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
LFE signals output
Subwoofer(s) and speakers
Choice
Subwoofer(s)
BOTH
Output
SWFR Output
FRONT No output
Low-frequency signals output
Subwoofer(s) and speakers
Choice
Subwoofer(s)
BOTH *1
SWFR
*4
FRONT No output
*1 Output(s) the low-frequency signals of the front
channels and other speakers set to "SMALL".
*2 Always output the low-frequency signals of the front
channels.
*3 Output the low-frequency signals if the speakers are set
to "LARGE".
*4 Outputs the low-frequency signals of the speakers set to
"SMALL".
68
En
Front Other
speakers speakers
No output No output
No output No output
Output No output
Front Other
speakers speakers
*2 *3
*3 *3
*1 *3
Measure for the speaker size
The woofer section of a speaker is
– 16 cm (6.5 in) or larger: large
– smaller than 16 cm (6.5 in): small
Front speakers FRONT SP
Choice
LARGE Select this setting when the front speakers are
large.
SMALL Select this setting when the front speakers are
small.
Note
When "LFE/BASS OUT" is set to "FRONT", you can select
only "LARGE" in "FRONT SP". If the value of "FRONT SP" is
set to other than "LARGE" in advance, this unit change the
value to "LARGE" automatically.
Center speaker CENTER SP
Choice
LARGE Select this setting when the center speaker is
large.
SMALL Select this setting when the center speaker is
small.
NONE Select this setting when you do not use the center
speaker. The center channel signals are directed
to the front left and right speakers.
Surround left/right speakers SUR. L/R SP
Choice
LARGE Select this setting when the surround speakers
are large.
SMALL Select this setting when the surround speakers
are small.
NONE Select this setting when you do not use the
surround speakers. This unit is set to the Virtual
CINEMA DSP mode (page 44), and "SUR.B L/
R SP" is automatically set to "NONE".
Descriptions
Descriptions
Descriptions