Network Settings - NEC Univerge sv8500 Manual

Fp85-110 s7
Hide thumbs Also See for Univerge sv8500:
Table of Contents

Advertisement

4.1

Network Settings

This section explains each setting on the Network Settings Menu. The Network Settings Menu has the following
items:
DHCP Mode
IP Address
Default Gateway
Subnetmask
DNS Address
Advanced Settings : Set the network expansion data.
STEP 1: To open the Network Settings Menu, select "1.Network Settings" by pressing "1" key on the Main
Menu.
STEP 2: The Network Settings Menu appears as follows:
To go back to the Main Menu, press Exit key.
Note:
: Select whether to use DHCP protocol.
: Set IP address of the DtermIP (SIP).
: Set IP address of the default router.
: Set subnet mask of the DtermIP (SIP).
: Set the IP address of the DNS server.
Main Menu
1.Network Settings
2.SIP Settings
3.Audio&Visual Settings
4.Maintenance Settings
5.Terminal Information
Up
Down Cancel
Network Settings Menu
11.DHCP Mode
2.IP Address
3.Default Gateway
4.Subnetmask
5.DNS Address
6.Advanced Settings
Up
Down
VOL.3-530
CHAPTER 4
CONFIGURATION SETUP
Save
Exit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents