ORIENTATION
Emergency Pneumatic Door Release
An emergency release valve is located above the door in the header cover. To use the
emergency release, push the lever in the direction of the arrow. This valve exhausts
air pressure in the door cylinder, allowing the door to be opened and closed manu-
ally.
Electric Outward Opening Door
The electrically operated outward opening door has a gear box that moves a lever
attached to the front door. To open the door, hold the spring-loaded switch in the
driver's area in the "OPEN" position until the door stops moving. An automatic switch
stops the action of the door. To close the door, move the switch to the "CLOSE" posi-
tion; the door will stop automatically when fully closed. Depending on option or-
dered there is a keyed switch on the outside of the body, on the cowl panel by the
Air Door Emergency Release
door, which operates the door from outside the bus.
Emergency Electric Power Door Release
With the door in the fully closed position, pull the release lever in the header panel
toward OPEN as far as possible. The linkage will release and the lever will "snap" into a
"park" position so it will not return forward when released. Push the door open to exit
the bus. To reset the release mechanism, move the lever to its rearward position, and
hold the driver operated spring-loaded switch in the "open" position until it clearly
engages, or until door is in the fully open position.
Electric Door Emergency Release
15