CARE & MAINTENANCE
WINDSHIELD WIPERS
Washer Solution Reservoir
Periodically check the windshield washer solution reservoir, located behind the driv-
er's side front access panel. Be sure there is an adequate supply of fluid at all times.
The solution used is a 50/50 mixture of methanol and water.
Wiper Assembly Replacement
To replace wiper assembly, loosen lock nut, remove screw, and
pull wiper assembly loose from wiper arm. Replace the wiper as-
sembly and use original screw and lock nut. Tighten lock nut se-
curely, but do not tighten enough to compress the saddle. Blade
must be free to move on the axis (machine screw) and within the
saddle. Threading the lock nut until flush with the machine screw
end will give a secure and serviceable installation.
113