Table Of Contents - Kenwood RXD-M57MP-H Service Manual

RXD-M57MP
CONTENTS / ACCESSORIES / CAUTIONS
CONTENTS
CONTENTS / ACCESSORIES / CAUTIONS...............2
EXTERNAL VIEW ........................................................3
ADJUSTMENT .............................................................4
PC BOARD ..................................................................8
ACCESSORIES
AM loop antenna (1)
(T90-0908-08)
SYSTEM CONFIGURATION
SYSTEM
HM-537MP-H
HM-537MP-S
CAUTIONS
Resetting the Microcomputer
The microcomputer may malfunction (unit can-
not be operated, or shows an erroneous dis-
play) if the power cord is unplugged while the
power is ON, or due to some other external
factor. If this happens, execute the following
procedure to reset the microcomputer and
return the unit to its normal operating condition.
Plug in the AC power cord to the wall outlet,
and within 5 seconds, press and hold down
the 7 button and press CD button.
Please note that resetting the microcomputer
will clear the contents of the memory and
return the unit to the state it was in when it
left the factory .
2
FM ANT Wire (1) Remote control unit (1)
(A70-1688-08)
(T90-0918-08)
RECEIVER SPEAKERS
RXD-M57MP-H LS-M57-H
RXD-M57MP-S LS-M57-S
SCHEMATIC DIAGRAM ............................................13
EXPLODED VIEW .....................................................19
PARTS LIST...............................................................20
SPECIFICATIONS..................................BACK COVER
Batteries (R6/AA) (2)
Use to adapt the plug on the power
cord to the shape of the wall outlet.
(Accessory only for regions where
use is necessary.)
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A LASER DE CLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
The marking this product has been classified as Class 1.
It means that there is no danger of hazardous radiation
outside the product.
Location: Bottom
AC plug adapter (1)
(E03-0115-05)