Table Of Contents; Contents / Accessories / Cautions - Kenwood RXD-803 Service Manual

RXD-803/803E/853/853E/A83
Contents
CONTENTS / ACCESSORIES / CAUTIONS............. 2
EXTERNAL VIEW .......................................................3
DISASSEMBLY FOR REPAIR....................................3
BLOCK DIAGRAM ......................................................4
CIRCUIT DESCRIPTION ............................................5
ADJUSTMENT ..........................................................11
Accessories
FM indoor antenna (1)
(T90-0836-05)
AC plug adaptor (1)
(E03-0115-05)
Use to adapt the plug on the power
cord to the shape of the wall outlet.
(Accessory only for regions where
use is necessary.)
SYSTEM CONFIGURATION
SYSTEM MAIN UNIT DESTINATION
XD-803 RXD-803
XD-803E RXD-803E E2
XD-853 RXD-853
XD-853E RXD-853E E2
XD-853(M3) RXD-853
XD-A83 RXD-A83
Cautions
Operation to reset
The microcomputer may fall into malfunction (impossibility
to operate, erroneous display, etc.) when the power cord is
unplugged while power is ON or due to an external factor.
In this case, execute the following procedure to reset the
microcomputer and return it to normal condition.
2
CONTENTS / ACCESSORIES
AM loop antenna (1) Remote
(T90-0852-05) (A70-1367-05): RC-853....KPMXY
(T90-0837-05) (A70-1368-05): RC-853E....TEE2
Battery cover (A09-1151-08)
SPEAKER
E LS-N523
LS-N523
YMXTE LS-N573
LS-N573
M LS-N573(M3)
KP LS-N573
PC BOARD .............................................................. 13
SCHEMATIC DIAGRAM .......................................... 19
EXPLODED VIEW ....................................................35
PARTS LIST..............................................................37
SPECIFICATIONS ......................................Back cover
control unit (1)
Surround speaker system
Surround speaker (2)
Speaker cord (2)
Speaker stabilizer (8)
SP CORD PARTS No. SPEAKER
E30-5829-08 CRS-N503
E30-5829-08 CRS-N503
E30-5829-08 CRS-N553
E30-5829-08 CRS-N553
E30-5829-08 CRS-N553
E30-5829-08 CRS-N553
Unplug the power cord from the power outlet then,
while holding the ENTER key depressed, plug the
power cord again.
(Main unit only)
÷ Please note that resetting the microcomputer clears the
stored contents and returns to the factory set condition.
Batteries (R6/AA) (2)
Center speaker (1)
Speaker cord (1)
Speaker stabilizer (4)
SP CORD PARTS No.
E40-5542-05
E40-5542-05
E40-5542-05
E40-5542-05
E40-5542-05
E40-5542-05
ENTER