Planning - Bosch KBN Series Installation Manual

KBN & KBE Series Cameras
4

Planning

All Recommended operating voltage is 24 VAC, 60 Hz, with the
following power consumptions:
–
–
Power Connections
The external power cable is provided to allow for necessary
stripping/preparation by the installer. The cable has three wires
for the transmission of 24 VAC power.
Color
Green
White
Black
Bosch recommends that you connect the incoming 24 VAC
power cables to the camera cable using wire connectors inside
a junction box. For additional information, see the Installation
Manuals included in the Instruction Booklet Packet.
Bosch Security Systems, Inc.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Analog cameras
– KBx-435, KBx-455: 4W (excluding lens)
– KBx-485, KBx-610: 4W
– KBx-498, KBx-630: 350 mA (12 VDC); 250 mA (24
VAC); 70 mA (120-240 VAC)
IP cameras
– KBx-455xxx-21N/NV: 450 mA/550 mA (IVA) (12 VDC,
24 VAC); 200 mA/250 mA (IVA) (PoE 48 VDC)
– KBx-498xxx-20N/NV: 550 mA/650 mA (IVA) (12 VDC,
24 VAC); 200 mA/250 mA (IVA) (PoE 48 VDC)
Connection
Ground
24 VAC
24 VAC
Installation Manual
Planning | en
F.01U.215.198 | 4.0 | 2011.01
19