Dimensional Drawing & Centre Of Gravity - Daikin FT35CV1A9 Technical Manual

3 Dimensional drawing & centre of gravity
3 - 1 Dimensional drawing
FT25,35CV1A9
1
3
Rear
Left
Bottom
Flaps
Signal transmitter
(ARC423A18)
WIRELESS REMOTE
CONTROLLER
5
• Indoor Units • R-22 • FT-C
Right
Signal receiver
Room temp. thermistor
Front panel fixed screws (inside)
Timer indicator lamp
Operation indicator lamp
Operation switch
BLADE ANGLE
Up/down (automatic)
cooling, dry
Right/left (manual)
• Split Sky Air • Indoor Units
Air flow (indoor)
(for performance and maintenance)
REQUIRED SPACE
(including mounting
plate)
50 min.
(space for performance)
Name plate
Terminal block with
earth terminal
Gas pipe 9.5 CuT (FT25C--) or
12.7 CuT (FT35C--)
(the length of pipe outside the
unit: about 340)
Liquid pipe 6.4 CuT
(the length of pipe outside
the unit: about 390)
Blow
Wall hole for
embedded piping
ø 65 hole
STANDARD LOCATIONS OF WALL HOLES
50 min.
(space for performance)
Drain hose
(connecting part I.D. ø 14.0,
O.D. ø 18.0)
(the hose length of outside
the unit is approx. 410)
Wall hole
ø 65 hole
3D045893