HP 5920 series Configuration Manual page 18

Select For FTP from the Network list, VM1 VSI from VSI Type, and VM1 VSI (V1) from VSI
−
Type Version.
Click OK.
iv
The connection VM1CON is displayed in the Connection List page, as shown in
Figure 8 Connection List page
4. Verify the configuration:
After VM 1 starts, the VAN Connection Manager service component of IMC deploys the VSI type
VM1 VSI on EVB bridge 1. Only the R&D center can use the FTP service on VM 1.
15
Figure 8.