HP 5920 series Configuration Manual page 17

Select Network from the navigation tree, click Add on the page that appears, enter For FTP for
Name, 100 for VLAN ID, and 10 for Max. Connections, and click OK.
The network name For FTP is displayed in the Network List page, as shown in
Figure 6 Network List page
c. Define the VSI type of VM 1:
Select VSI Type from the navigation tree. The VSI Type List page appears.
i
Click Add.
ii
On the page that appears, do the following:
iii
Enter VM1 VSI for Name.
−
Select For FTP from the Network list, and select the Bandwidth Control and VM Access
−
Control options.
Enter 172.16.1.0 for Client IP and 0.0.0.255 for Wildcard Mask.
−
− Select BOTH from the Filtering Direction list.
Enter 2048 for CIR (kbps) and 4096 for PIR (kbps).
−
Click Save and Release.
iv
The VSI type VM1 VSI is displayed in the VSI Type List page, as shown in
Figure 7 VSI Type List page
d. Bind the VSI type VM1 VSI to the vNIC of VM 1 to define the connection:
Select Connection from the navigation tree. The Connection List page appears.
i
Click Add.
ii
iii On the page that appears, do the following:
Enter VM1CON for Name.
−
Click Select on the right side of the page, select the VM1 option from the popup window,
−
and then click OK (the MAC address 0050-5684-21c7 of VM 1 is displayed in the vNIC
field).
14
Figure 6.
Figure 7.