Adjustable Pedals; Power Folding Mirrors; Automatic Climate Controls; Tri-Zone Automatic Climate Control System - Cadillac Escalade Personalization Manual

E S C A L A D E / E S C A L A D E
For more information about OnStar
features, refer to the OnStar Owner's
Manual and Audio CD, located in your
glove box.
*Available in most markets
**Routing and location assistance may require
service upgrade
Turn the outside temperature displays
and compass readings on or off
• Press button "1" above.
Display temperature
• Press this button ("1" above) and hold
for four seconds to toggle between °C
and °F. Once the desired °C or °F is
displayed, release the button. Wait
four seconds and the temperature will
be displayed.
ADJUSTABLE
PEDALS
The buttons used to
adjust the pedals are
located on the driver's
side door panel.
• Press the button closest to you to
move the pedals closer to your body.
• Press the button farthest from you to
move the pedals away from your
body.
The vehicle must be in Park (P) for this
feature to operate.

POWER FOLDING MIRRORS

Fold mirrors
• Move this selector switch ("1" below)
located above the mirror
control to the center
position.
• Press the right side
of the four-way
control pad ("2"
right) to fold the
mirrors in.
• Press the left side of
the four-way control
pad ("3" right) to
fold the mirrors out.
If the mirrors have been folded
manually, they must be moved through
the power folding cycle three times to
reset them in their tracks.
Automatic Climate
Controls
TRI-ZONE AUTOMATIC CLIMATE
CONTROL SYSTEM
Escalade's Tri-Zone Automatic Climate
Control System features dual zone
operation in the front and single zone
operation for rear seat passengers.
Front Dual-Zone Climate Control
System
Adjust settings for automatic
operation
• Push the AUTO button ("1" below)
and adjust the temperature knobs
1
("2" and "3" below) to the desired
temperature to set the automatic air
delivery mode, fan speed, A/C and
recirculation functions for the front
2
passengers. Because this is an
automatic system, the A/C mode is
the default setting.
E S V