Test Print Mode (Test Mode 04) - Sharp AR-650 Service Handbook

1.2.3

Test print mode (test mode 04)

In test mode "04", you can print the test pattern generated by the following ASIC codes.
Code ASIC
111 SH Primary scanning. 33 gradations, error diffusion
113 SH Secondary scanning. 33 gradations, error diffusion
142 POPS 2 dots grid pattern (10mm Pitch)
<Operation procedure>
[0] [4] (Code)
[PWR]
Note: Though errors are displayed when it occurs, recovery is not carried out. This is recovered by
turning the power OFF then ON again.
Test pattern type
[START] Operation
(Test print)
1 - 13
[C] [0] [9] Warm-up
ADJUSTMENT
Remarks