Specifications - Stihl MSA 200 C Instruction Manual

Specifications

Battery
Model: Lithium-ion
The unit can be operated only with
original STIHL rechargeable batteries.
Running time is dependent on the
energy content of the battery.
Charger
AL 100
Mains voltage: 220-240 V
Rated current: 0.6 A
Frequency: 50 Hz
Power consumption: 75 W
Charging current: 1.6 A
Insulation: II, E (double
insulated)
AL 300
Mains voltage: 220-240 V
Rated current: 2.6 A
Frequency: 50 Hz
Power consumption: 330 W
Charging current: 6.5 A
Insulation: II, E
MSA 200 C
Charging Times
AL 100
with AP 80:
– up to 80% capacity: 70 min
– up to 100% capacity: 100 min
with AP 120:
– up to 80% capacity: 120 min
– up to 100% capacity: 140 min
with AP 160:
– up to 80% capacity: 150 min
– up to 100% capacity: 165 min
with AP 180:
– up to 80% capacity: 160 min
– up to 100% capacity: 210 min
AL 300
with AP 80:
– up to 80% capacity: 25 min
– up to 100% capacity: 50 min
with AP 120:
– up to 80% capacity: 30 min
– up to 100% capacity: 60 min
with AP 160:
– up to 80% capacity: 35 min
– up to 100% capacity: 60 min
with AP 180:
– up to 80% capacity: 40 min
– up to 100% capacity: 70 min
Chain Lubrication
Fully automatic, speed-controlled oil
pump with reciprocating piston
Oil tank capacity: 0.21 L
Weight
with bar and chain, without battery
MSA 200 C: 3.3 kg
Cutting Attachment
Rollomatic E Mini 1/4" Picco guide bars
Cutting length: 25, 30, 35 cm
Pitch: 1/4" P (6.35 mm)
Groove width: 1.1 mm
Nose sprocket: 8-tooth
1/4" Picco chain
Picco Micro 3 (71 PM3) Type 3670
Pitch: 1/4" P (6.35 mm)
Drive link gauge: 1.1 mm
Chain sprocket
6-tooth for 1/4" P
Noise and Vibration Data
Noise and vibration data are determined
on the basis of the rated maximum
speed.
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L to
p
EN 60745 - 2 - 13
MSA 200 C: 84 dB(A)
Sound power level L to EN 60745 - 2 - 13
w
MSA 200 C: 95 dB(A)
English
87