Using Laundry Product Dispensers; Select Load Size - Amana NTC3500FW Use And Care Manual

Compact washer
Table of Contents

Advertisement

Available languages

Available languages

Using Laundry Product Dispensers

NOTE: Do not add liquid laundry detergent, single-dose
laundry packets, color-safe bleach, Oxi-type boosters, or
fabric softener crystals to dispensers. They will not dispense
correctly. Add to the basket prior to adding laundry.
4.
Add powdered HE detergent
IMPORTANT: Use only High Efficiency detergents. The
package will be marked "HE" or "High Efficiency." Low-water
washing creates excessive sudsing with a regular non-HE
detergent. Using regular detergent will likely result in longer
cycle times and reduced rinsing performance. It may also
result in component failures and noticeable mold or mildew.
HE detergents are made to produce the right amount of
suds for the best performance. Follow the manufacturer's
instructions to determine the amount of detergent to use.
NOTES:
Use only powdered HE detergent in the detergent
dispenser. Add liquid HE detergent or single-dose packets
to the basket prior to adding laundry.
See "Washer Maintenance" for information on
recommended method of cleaning washer dispensers.
5.
Add liquid chlorine bleach
to dispenser
Bleach will be dispensed automatically during the wash part
of the cycle. Do not overfill, dilute, or use more than 1 cup
(250 mL). Do not use color-safe bleach or Oxi products in
the same cycle with liquid chlorine bleach.
16
6.
Add liquid fabric softener
Pour a measured amount of liquid fabric softener into
dispenser; always follow manufacturer's directions for correct
amount of fabric softener based on your load size. Fabric
Softener is added during rinse.
IMPORTANT: Do not overfill or dilute. Overfilling dispenser
will cause fabric softener to immediately dispense into washer.
It is normal for a small amount of water to remain in the
dispenser at the end of a cycle.
NOTE: The fabric softener dispenser rotates around the wash
basket and may not be in the same spot each time.
7.
Press POWER to turn on washer
Close the washer lid. Washer will not fill, agitate, or spin
with the lid open. Make sure the dispenser drawer is closed
completely; then press POWER to turn on the washer.
8.

Select LOAD size

Press the Load button to select the correct setting for
your wash load and the type of fabric being washed.
Choose a water level that allows the load to move freely
for best fabric care.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents