Page 6
These instructions for use are applicable for two Philips Baby Bottle Warmer models: Model SCF205; For use at home. Model SCF215; For use at home and in the car (with extra car adapter). Note: Please read these instructions carefully and retain for future reference.
Page 7
Place the Baby Bottle Warmer out of the reach of children and on a dry, non-slip, horizontal surface. Turn the click-step control knob 4 to the "." position. Unreel the required cable length from the cable reservoir 8 and plug into the mains outlet.
Page 8
ENGLISH Set the required temperature using the click-step control knob. The indicator lamp lights to indicate the heating operation. After approximately 8 minutes the milk will have reached just the right temperature for your baby.The indicator lamp goes out.The indicator lamp then switches on and off intermittently to indicate the thermostat is controlling the temperature of the water.
Page 9
Keeping warm With the Baby Bottle Warmer you can also keep the bottles and jars warm for a short time.To do this set the control knob to position The thermostat ensures that the set temperature is maintained. For microbiological and hygienic reasons baby food should never be kept warm for longer than one hour.
Page 10
Guarantee & service If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet).
Page 11
Trouble shooting Comments Overflow of water Temperature too low Temperature too high The jar has not heated correctly The indicator light switches on and off while keeping warm ENGLISH Solutions You have put too much water into the inner container Continue heating for a few seconds after the indicator light has switched off, or increase the adjustment setting...