Sas/Sata Raid Controller; Inserting The Raid Key - Fujitsu PRIMERGY TX300 S5 Options Manual

10

SAS/SATA RAID controller

V
CAUTION!
Follow the safety instructions in the chapter
page 17.
10.1

Inserting the RAID key

The SATA SW RAID 5 functionality will be activated by installing a license key
(RAID key).
Ê Open the server (see chapter
Ê Remove the fan bracket (see section
page 33).
Ê Remove the SAS/SATA RAID controller (see operating instructions).
Figure 59: Inserting the RAID key
Ê Insert the RAID key in the round socket on the SAS/SATA RAID controller.
TX300 S5
"Preparation" on page
"Removing the fan bracket" on
Options Guide
"Safety instructions" on
23).
87