Setting Date And Time - Panasonic VDR-D310GC Operating Instructions Manual

LSQT1158_EN.book 134 ページ ２００６年１２月２６日 火曜日 午前１０時３０分
Setup
≥ Use the direction buttons (3,4,2,1) and
ENTER button in place of the joystick on the
main unit.
3
Press the MENU button to exit
the menu screen.
ENTER

Setting date and time

When the unit is turned on for the first time, a
message asking you to set the date and time will
appear.
≥ Select [YES] and press the joystick. Perform
steps 2 and 3 below to set the date and time.
If the screen shows the incorrect date and time,
then adjust it.
¬ Rotate the mode dial to select
.
1
Press the MENU button, then
select [BASIC] # [CLOCK SET]
# [YES] and press the joystick.
2
Move the joystick left or right to
select the item to be set. Then,
134
LSQT1158
MENU
≥ The year will change as follows:
≥ The 24-hour system is used to display the time.
3
≥ The clock function starts at [00] seconds when
≥ After pressing the MENU button to finish the
∫ Changing the date and time display style
Press the MENU button, then select [SETUP]
# [DATE/TIME] # desired display style and
press the joystick.
≥ You can also show or change the date and
or
[DATE]
[OFF]
MENU
∫ Changing the display style
Press the MENU button, then select [SETUP]
# [DATE FORMAT] # desired display style
and press the joystick.
move the joystick up or down to
set the desired value.
2000, 2001, ..., 2099, 2000, ...
Press the joystick to enter the
selection.
the joystick is pressed.
setting, check the date and time display.
time display by repeatedly pressing the DATE/
TIME button on the remote control.
(VDR-D310)
[D/T]
15.12.2007 15:30
15.12.2007
Display style
[Y/M/D] 2007.12.15
[M/D/Y] 12.15.2007
[D/M/Y] 15.12.2007
Screen display