Easy Edit; Saving A Patch - Boss GT-1 Owner's Manual

Editing: Effects

EASY EDIT

You can use EASY EDIT to change the type of distortion
(TONE) for the current sound, add or modify a modulation-
type effect (VIBES), or change the reverberation (ECHO).
1.
With the play screen displayed, press the [EASY
EDIT] button
The EASY EDIT screen appears.
2.
Use the [1]–[3] knobs to adjust "TONE," "VIBES," and
"ECHO" to your taste.
With the EASY EDIT screen displayed, you can press the
[ENTER] button to make the following detailed settings.

Saving a Patch

When you want to save a patch you have created, save it as
a user patch by following the procedure below. If you do
not save the patch, the edited settings will be lost when
you turn off the power or switch to another patch.
1.
Press the [EXIT] button and [ENTER] button
simultaneously.
The WRITE UTILITY screen appears.
2.
Choose "WRITE" (PATCH RIGHT) with the [1] knob,
and press the [ENTER] button.
3.
Choose the patch write destination (U01–U99) with
the [1] knob.
4.
Press the [ENTER] button.
Here you can edit the name.
Controller Operation
Knob [1] Changes the character
Knob [2]
Moves the cursor
Knob [3] Selects the type of characters
5.
Press the [ENTER] button.
Here you can specify the category of the patch.
Use the [1] knob to select the category.
6.
Press the [ENTER] button once again.
Once the patch has been saved, you are returned to the
Play screen.
6