Kenmore 146. 34436410 Use & Care Manual
Kenmore 146. 34436410 Use & Care Manual

Kenmore 146. 34436410 Use & Care Manual

Hide thumbs Also See for 146. 34436410:

Advertisement

Available languages

Available languages

Quick Links

Use & Care Guide
Manual de Uso y Cuidado
English / Español
Kenmore
®
Liquid Propane Gas Grill
Parrilla a gas de propane liquido
Model/Modelo:
146. 34436410
Item / Artículo:
640-06378262-7
P/N 00500120
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com
www.kmart.com
®

Advertisement

Table of Contents
loading

Summary of Contents for Kenmore 146. 34436410

  • Page 1 Manual de Uso y Cuidado English / Español Kenmore ® Liquid Propane Gas Grill Parrilla a gas de propane liquido Model/Modelo: 146. 34436410 Item / Artículo: 640-06378262-7 P/N 00500120 Sears Brands Management Corporation Hoffman Estates, IL 60179 U.S.A. www.kenmore.com www.sears.com www.kmart.com...
  • Page 2: For Your Safety

    Installation Safety Precautions DANGER • Please read this User’s Manual in its entirety before using the grill. • Failure to follow the provided instruction can result in If you smell gas: seriously bodily injury and/or property damage. • Some parts of this grill may have sharp edges. Please wear suitable protective gloves.
  • Page 3: Table Of Contents

    Wash your hands after using this product. Repair Protection Agreements ® Congratulations on making a smart purchase. Your new Kenmore product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time to time That's when having a Repair Protection Agreement can save you money and aggravation.
  • Page 4: Kenmore Grill Warranty

    WARRANTY WARRANTY KENMORE GRILL WARRANTY Kenmore One Year Limited Warranty When installed, operated and maintained according to all supplied instructions, if this appliance fails due to a defect in ® material and workmanship within one year from the date of purchase, call 1-800-4-MY-HOME to arrange for free repair or replacement if repair is unavailable.
  • Page 5: Use And Care

    LP Cylinder USE AND CARE • The LP cylinder used with your grill must meet the following requirements: DANGER • Use LP cylinders only with these required measurements: 12" (30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.) Capacity maximum.
  • Page 6 LP Tank Exchange Connecting Regulator To The LP Tank • Many retailers that sell grills offer you the option of replacing 1. LP tank must be properly secured onto grill. (Refer to your empty LP tank through an exchange service. Use only those assembly section.) reputable exchange companies that inspect, precision fill, test 2.
  • Page 7 Leak Testing Valves, Hose and Regulator 1. Turn all grill control knobs to OFF. 2. Be sure regulator is tightly connected to LP tank. 3. Completely open LP tank valve by turning OPD hand wheel counterclockwise. If you hear a rushing sound, turn gas off immediately.
  • Page 8 Safety Tips WARNING ▲ Before opening LP cylinder valve, check the coupling nut for tightness. ▲ When grill is not in use, turn off all control knobs and LP cylinder For Safe Use of Your Grill and to Avoid Serious valve.
  • Page 9 Burner Flame Check WARNING • Remove cooking grates and heat diffusers. Light burners, turn knobs from HI to LO. You should see a smaller flame in LO position than seen on HI. Perform burner flame check Turn controls and gas source or tank OFF when not on side burner, also.
  • Page 10: Food Safety

    Food Safety Food safety is a very important part of enjoying the outdoor cooking experience. To keep food safe from harmful bacteria, follow these four basic steps: Clean: Wash hands, utensils, and surfaces with hot soapy water before and after handling raw meat and poultry. Separate: Separate raw meats and poultry from ready-to-eat foods to avoid cross contamination.
  • Page 11: Parts List

    PARTS LIST Description Part Number Description Part Number Description HEAT DIFFUSERS 00500002 00500098 Side Burner Lid Double Ignition Wire COOKING GRATE 00500085 Griddle Right Panel, Module Head 00400014 SWING AWAY GRATE 00500090 Side Burner Grid Left Back Panel 00500065 00500001 CLIP, F/ GREASE CUP Module Head Regulator...
  • Page 12: Parts Diagram

    PARTS DIAGRAM PARTS DIAGRAM 12. 34436-00500120...
  • Page 13: Before Assembly

    BEFORE ASSEMBLY NOTICE: Once you have unpacked the outdoor sink module according to the STOP SHEET instructions, check all parts against the pictures on this and the following page. If any parts are missing or damaged, call 1-888-287-0735 34436-00500120 • 13...
  • Page 14 BEFORE ASSEMBLY Step 2: 14. 34436-00500120...
  • Page 15: Assembly

    ASSEMBLY CAREFULLY READ AND PERFORM ALL ASSEMBLY INSTRUCTIONS ON THE FOLLOWING PAGES. Tools Required: Adjustable wrench (not provided) #2 and #3 Philips Screwdriver (not provided) The following hardware is provided in two blister packs for convenient use. M4X10 screw AAA Battery Qty: 41 pcs Qty: 1 pc M6X13 screw...
  • Page 16 Bottom Shelf Turn bottom shelf upside down. Attach the casters to bottom shelf with (16) M6x13 screws. □ Note: Install each caster into the correct position as shown in the figure below. The standard caster will only install in one direction. □...
  • Page 17 Cart □ Attach angle support bar to left side panel with (2) M4x10 screws. (A) □ Attach left side panel to bottom shelf with (2) M6x13 screws as shown (A). Secure angle support bar to bottom shelf with (2) M4x10 screws. (A) □...
  • Page 18 Cart □ Attach (2) M4x10 screws to one side of support shelf. Do not fully tighten at this time. Install the support shelf to the left panel and middle baffle plate as follows: Insert screw heads through slots in middle baffle plate. Allow heads to drop down into slots and tighten screws.
  • Page 19 Module Head to Cart □ This step requires two people to lift and position module head onto cart. □ Raise the burner lids, and remove the packaging and grates underneath. Set the grates aside. Remove the tie wraps and packaging from the regulator hose on the underside of the module head. □...
  • Page 20 Match Holder & Grease Cups □ Attach the match holder to the middle baffle plate as shown (A) □ Slide the two grease cups into position from rear of cart as shown (B). □ Unscrew igniter cap from control panel. Insert (1) AAA battery (provided in blister pack) into battery slot with positive end (+) facing outward.
  • Page 21 Cooking Grates & Cooking Griddle □ Place cooking grates over side burner and searing burner as shown (A). For side burner, make sure the grate is properly situated around the four locating pins. (A) □ Place cooking griddle onto side burner as shown (B). NOTE: Side burner cooking grate and cooking griddle cannot be used at the same time.
  • Page 22 Prepare Connection of Burner Module to Gas Grill 16142 Note: The following 8 assembly steps are to be followed only if you have purchased a model 16142 gas grill and/ or a model 34437 Sink Module, for connection to the model 34436 Burner Module. □...
  • Page 23 Connect Burner Module to Grill 16142 □ Align right panel of burner module with left panel of 16142 grill so that tips of fly-headed screws protrude through vents in grill. Screw (4) wing nuts onto tips of screws to secure panels together as shown (A). □...
  • Page 24 Prepare Connection of Sink Module to Burner Module and Gas Grill 16142 □ Insert tips of (4) fly-headed screws through vent slots of sink module cart right panel as shown . Screw( 4) connecting plates onto screw tips to secure in place. Fly-headed screw Qty: 4 pcs Connecting plate Qty: 4 pcs 24.
  • Page 25 Connection Sink Module to Burner Module and Gas Grill 16142 □ Align right panel of sink module with left panel of burner module so that tips of fly-headed screws protrude through vents in grill. Screw (4) wing nuts onto tips of screws to secure panels together as shown (A). □...
  • Page 26 Prepare Connection of Sink Module to Gas Grill 16142 □ Detach left side shelf from grill cart by removing the (4) M6x13 and (1) M4x10 screws as shown (A). □ Insert tips of (4) fly-headed screws through vent slots of sink module cart right panel as shown (B). Screw( 4) connecting plates onto screw tips to secure in place.
  • Page 27 Connect Sink Module to Grill 16142 Align right panel of sink module with left panel of 16142 grill so that tips of fly-headed screws protrude □ through vents in grill. Screw (4) wing nuts onto tips of screws to secure panels together as shown (A). Use (2) M5x15 screws, and (2) M6x13 and (1) M4x10 previously removed screws to connect the □...
  • Page 28 Prepare connection of Burner Module to Sink Module and Gas Grill 16142 □ Insert tips of (4) fly-headed screws through vent slots of burner module cart right panel as shown . Screw( 4) connecting plates onto screw tips to secure in place. Fly-headed screw Qty: 4 pcs Connecting plate Qty: 4 pcs 28.
  • Page 29 Connection Burner Module to Sink Module and Gas Grill 16142 □ Align right panel of burner module with left panel of sink module so that tips of fly-headed screws protrude through vents in grill. Screw (4) wing nuts onto tips of screws to secure panels together as shown (A). □...
  • Page 30: Troubleshooting

    EMERGENCIES: If a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department. Problem Possible Cause Prevention/Solution Gas leaking from •Turn off gas at LP cylinder or at source on natural gas systems. •...
  • Page 31 Troubleshooting (continued) Problem Possible Cause Prevention/Solution Prevention/Solution Burner(s) will not light ELECTRONIC IGNITION: • See Section I of Electronic Ignition System. using igniter. • No spark, no ignition noise. (See Electronic • See Section II of Electronic Ignition System. Ignition •...
  • Page 32 Troubleshooting - Electronic Ignition Prevention/Solution Problem Possible Cause Check Item Preventio • Battery not installed SECTION I • Check battery orientation. • Install battery (make sure that “+” and “-” properly. No sparks appear at connectors are oriented correctly, with “+” end any electrodes when up and “-”...
  • Page 33 Medidas de seguridad para la instalación PELIGRO • Por favor, lea este manual del usuario en su totalidad antes de usar la parrilla. • El incumplimiento de las enseñanzas impartidas en serio puede resultar en lesiones corporales y / o daños materiales. Si siente olor a gas: •...
  • Page 34 Medidas de seguridad para la instalación ..33 PROPOSICION 65 DEL ESTADO DE CALIFORNIA ..35 Garantía para la parrilla Kenmore . . . 1. Subproductos de la combustión generados al usar este Uso y mantenimiento ..36-41 producto contienen sustancias químicas conocidas en el...
  • Page 35: Hoffman Estates, Il

    GARANTÍA Garantía completa de un año para la parrilla Kenmore Garantía limitada de un año de Kenmore Si esta parrilla falla debido a defectos de material o de mano de obra dentro del plazo de un año desde la fecha de compra, llame al 1-800-4-MY-HOME ?ón gratuita (o el cambio si la reparación resulta imposible de realizar)
  • Page 36 UOS Y MANTENIMIENTO Tanque de gas propano • El tanque de gas que use con su parrilla debe cumplir los PELIGRO siguientes requisitos: • Use únicamente tanques de gas que tengan las siguientes medidas obligatorias: 12" (30.5 cm) (diámetro) x 18" (45.7 •...
  • Page 37 Cambio del tanque de gas Como conectar el regulador al tanque de gas propano • Muchos comerciantes minoristas que venden parrillas, le 1. El tanque de gas debe quedar bien fijado a la parrilla. (Lea la ofrecen la opción de cambiar su tanque de gas vacío mediante sección de ensamblado.) un servicio de recambio.
  • Page 38 Prueba para detectar fugas de las válvulas, las mangueras y el regulador 1. Gire todas las perillas de control de la parrilla a la posición deAPAGADO. 2. Cerciórese de que el regulador esté bien conectado al tanque de gas. 3. Abra por completo la válvula del tanque, girando la manilla en sonido sentido contrario a las agujas del reloj.
  • Page 39: Consejos De Seguridad

    Consejos de seguridad ADVERTENCIA ▲ Verifique que la tuerca de unión esté bien apretada antes de abrir la válvula del tanque de gas. ▲ Cuando no use la parrilla, cierre todas las perillas de control Para usar su parrilla en forma segura y para evitar y la válvula del tanque de gas.
  • Page 40 Control de la llama del quemador ADVERTENCIA • Retire las parrillas de cocción y los reguladores de llama. Encienda los quemadores y gire las perillas, de la graduación ALTA (HI) a la graduación BAJA (LO). Deberá ver una llama más reducida en la Gire los controles y la fuente de gas o OFF tanque cuando graduación baja que en la graduación alta.
  • Page 41 Cocción: Cocine bien las carnes y las piezas de ave, para matar las bacterias. Use un termómetro para verificar que los alimentos alcancen la temperatura interna adecuada. Refrigeración: Refrigere con prontitud los alimentos preparados y las sobras. Para mayor información llame a: la línea de información sobre carnes y aves del Ministerio de Agricultura de EE UU, 1-800-535- 4555.
  • Page 42 LISTA DE PIEZAS Clave Descripci ó n Cant Pieza No. Clave Descripci ó n Cant Pieza No. Description 00500002 00500098 Tapa del quemador lateral Doble cable de encendido 00500085 Plancha Módulo cabeza, Panel de la derecha 00400014 00500090 Parrilla del quemador lateral Panel trasero izquierdo 00500065 00500001...
  • Page 43 DIAGRAMA DE PARTES 34436-00500120 • 43...
  • Page 44 ANTES DE LA ASAMBLEA Aviso: Una vez desempaquetado el módulo exterior fregadero según las instrucciones de dejar de hoja, revise todas las partes contra las fotos en esta página y la siguiente. Si alguna pieza está dañada o falta, llame al 1-888-287-0735 44•...
  • Page 45 ANTES DE LA ASAMBLEA Paso 2: 34436-00500120 • 45...
  • Page 46 ASAMBLEA POR FAVOR LEA Y SIGA LAS INSTRUCCIONES CUIDADOSAMENTE PASO A PASO. Herramientas necesarias para el armado: Llave inglesa (que no viene incluida) Destornillador (que no viene incluida) #2 y #3 destornillador (no incluido) El siguiente hardware es proporcionado en dos blister conveniente para su uso. Tornillos de M4X10 AAA Battery Cant.:41 us...
  • Page 47 Estante inferior Voltee estante inferior. Fije las ruedas al estante inferior con (16) tornillos de M6x13. Nota: Instale cada rueda □ en la posición correcta como se muestra en la figura siguiente. El lanzador estándar sólo se instalará en una sola dirección.
  • Page 48 Carro □Coloque la barra de apoyo ángulo al lado izquierdo del panel con(2) tornillos de M4x10. (A) □Fije el panel lateral izquierdo para estante inferior con(2) tornillos de M6x13 as shown (A). Asegure la barra de soporte de ángulo para estante inferior con (2) tornillos de M4x10. (A) □Adjuntar parte posterior izquierda y derecha trasera de la placa deflectora media con(5) tornillos de M4x10 as shown (B).
  • Page 49 Carro tornillos de M4x10 □Adjuntar (2) a un lado del estante de la ayuda. No apriete completamente en este momento. Instalar la plataforma de apoyo para el panel de la izquierda y la placa deflectora media como sigue: -Inserte cabezas de los tornillos a través de ranuras en la placa deflectora media. Permita que se dirige a bajar en las ranuras y apriete los tornillos.
  • Page 50 Cabeza de módulo al carro. □ Este paso requiere dos personas levantar y posicionar el cabezal de módulo sobre carro. □ Levante la tapa del quemador y retire el embalaje y las rejillas debajo. Apartar las rejillas. Retire las ataduras y empaquetado de la manguera del regulador en la parte inferior de la cabeza del módulo.
  • Page 51 Partido titular & tazas de grasa □Instale el soporte del partido a la placa deflectora medio como se muestra (A) □Deslice las dos tazas de grasa en la posición de parte posterior del carro como se muestra (B). □Desatornille la tapa del encendedor desde panel de control. Inserte (1) batería AAA (disponible en paquete de ampolla) en la ranura de la batería con el extremo positivo (+) hacia el exterior.
  • Page 52 Las rejillas de cocción & plancha de cocina □Coloque rejillas de cocción sobre el quemador lateral y abrasador quemador como se muestra (A). Para quemador lateral, asegúrese de que la rejilla se encuentra correctamente alrededor de los cuatro tetones. (A) □Coloque la plancha sobre la hornilla lateral para cocinar como se muestra (B).
  • Page 53 Preparar la conexión del módulo del fregadero a Gas parrilla 16142 Nota: Los siguientes 8 pasos de montaje se deben seguir si usted ha comprado un modelo de 16142 parrilla de gas y / o un modelo 34437 Módulo de fregadero, para la conexión con el modelo 34436 del módulo del quemador. □...
  • Page 54 Conecte el módulo de fregadero 16142 la parrilla □ Alinee el panel de la derecha del módulo del fregadero con el panel izquierdo de la parrilla 16142 para que sobresalgan puntas de tornillos de cabeza volar a través de respiraderos en la parrilla.Tornillo (4) tuercas de mariposa sobre las puntas de los tornillos para fijar los paneles como se muestra(A).
  • Page 55 Preparar la conexión del fregadero módulo a módulo de quemador y parrilla de Gas 16142 □Inserte consejos de (4) tornillos de cabeza de mosca a través de las ranuras de ventilación del panel derecho fregadero módulo carrito como se muestra. Tornillo placas en ( 4) placas de conexión consejos de tornillo para asegurar en su lugar.
  • Page 56 Conexión fregadero módulo a módulo de quemador y parrilla de Gas 16142 □ Alinee el panel de la derecha del módulo del fregadero con el panel izquierdo del módulo de quemador para que sobresalgan puntas de tornillos de cabeza volar a través de respiraderos en la parrilla. Tornillo (4) tuercas de mariposa sobre las puntas de los tornillos para fijar los paneles juntos como se muestra (A).
  • Page 57 Prepare la conexión del módulo fregadero para Gas Grill 16142 □ Separar dejó la repisa del lado del carrito de la parrilla removiendo los (4) tornillos de M6x13 y (1) M4x10 como se muestra (A). □ Inserte consejos de (4) tornillos de cabeza de mosca a través de las ranuras de ventilación del disipador del módulo cesta panel de la derecha, como se muestra (B).Tornillo placas en...
  • Page 58 Conecte el módulo fregadero en Grill 16142 □ Alinear panel derecho del módulo de fregadero con panel izquierdo de la parrilla de modo que 16.142 puntas de los tornillos de la mosca con cabeza sobresalen a través de rejillas de ventilación en la parrilla. De tornillo (4) tuercas de mariposa hacia las puntas de tornillos para fijar paneles entre sí...
  • Page 59 Prepare la conexión del módulo a módulo del quemador Sink and Gas Grill 16142 □ Insertar puntas de (4) tornillos de cabeza de mosca a través de las ranuras de ventilación del quemador módulo cesta panel de la derecha, como se muestra. Tornillo placas en puntas de tornillos para asegurarla en su lugar.
  • Page 60 Módulo Quemador conexión al módulo de fregadero y parrilla de gas 16142 □ Alinear panel derecho del módulo de quemador con panel izquierdo del módulo de lavabo, así que las puntas de los tornillos de la mosca con cabeza sobresalen a través de rejillas de ventilación en la parrilla. De tornillo (4) tuercas de mariposa hacia las puntas de tornillos para fijar paneles entre sí...
  • Page 61 EMERGENCIAS: Si no se puede detener una fuga de gas, o si ocurre un incendio debido a una fuga de gas, llame a los bomberos. Emergencias Causas probables Medidas de prevención / solución • Cierre el gas en el cilindro o en la fuente de los sistemas de gas natural. •...
  • Page 62 Resolucion de problemas (continuacion) Problema Causas probables Medidas de prevención / solución • Limpie el cable y el electrodo con alcohol de frotar y un hisopo El quemador o los • El cable o el electrodo está cubierto con limpio. quemadores no se restos de comida.
  • Page 63 Resolución de problemas – Encendido electrónico Medidas de prevención / solución Problema (encendido) Causas probables Procedimiento de revisión Preventio Causas probables • Revise la orientación de la • Instale la pila (verifique que los polos “+” y “–” • La pila no está SECCIÓN I pila.
  • Page 64 Get it fixed, at your home or ours! Your Home For troubleshooting, product manuals and expert advice: www.managemylife.com For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.

Table of Contents