Switch Setting For Intelligent Function Module - Mitsubishi Electric QD62 User Manual

4 SETUP AND PROCEDURE BEFORE STARTING THE OPERATION
MELSEC-Q

4.5.2 Switch setting for intelligent function module

Five switches (switch numbers 1 to 5) are available for the intelligent function module
and they are set with 16 bit data.
If the switches for the intelligent function module are not set, the default value of 0 is
used for switches 1 to 5.
1) Click the I/O assignment tab of the PC parameter dialog
box in GX Developer. (Refer to Section 4.5.1)
4 - 16 4 - 16