Product Specific Problems; Usb Problems - Dell 1707FP Manual

LCD Scratched Screen has scratches or
smudges
Safety Related Visible signs of smoke or
Issues sparks
Intermittent Monitor malfunctions on &
Problems off
Image Retention Faint Shadow from the
(from a static static image displayed
image) appears on the
screen

Product Specific Problems

SPECIFIC SYMPTOMS
Screen image is too small
Cannot adjust the monitor with
the buttons on the front panel

USB Problems

SPECIFIC SYMPTOMS
USB interface is not
working
High Speed USB 2.0
interface is slow.
Troubleshooting Your Soundbar
Downloaded from ManualMonitor.com Manuals
WHAT YOU EXPERIENCE
Image is centered on screen, but
does not fill entire viewing area
OSD does not appear on the
screen
WHAT YOU EXPERIENCE
USB peripherals are not working
High Speed USB 2.0 peripherals working
slowly or not at all.
Perform monitor self-test feature check to determine if
scrambled screen appears in self-test mode
Check for bent or broken pins
Boot up in the "safe mode"
Turn monitor off and clean the screen
For cleaning instruction, see
Do not perform any troubleshooting steps
Monitor needs to be replaced
Ensure monitor is in proper video mode
Ensure video cable connection to computer and to the flat panel
is secure
Perform monitor reset
Perform monitor self-test feature check to determine if the
intermittent problem occurs in self-test mode
Use the Power Management feature to turn off the monitor at
all times when not in use. Alternatively, use a dynamically
changing screensaver left on the monitor for a long period of
time.
POSSIBLE SOLUTIONS
Perform monitor reset on "All Settings"
Turn the monitor off and unplug the
power cord and then plug back and
power on
POSSIBLE SOLUTIONS
Caring for Your Monitor.
Check that your monitor is powered
ON.
Reconnect the upstream cable to
your computer.
Reconnect the USB peripherals
(downstream connector).
Switch off and then turn on the
monitor again.
Check that your computer is USB 2.0
capable.
Verify USB 2.0 source on your
computer.
Reconnect the upstream cable to
your computer.
Reconnect the USB peripherals
(downstream connector).