Programming A Multi-Operation Or A Shutdown Sequence - Pioneer CU-RF100-U Operating Instructions Manual

03 Controlling the rest of your system
Similar to multi operations, System Off allows
you to use one button to stop and switch off a
series of components in your system at the
1
same time.
Programming a multi-operation or a
shutdown sequence
Set the remote control operation mode selector
switch to RECEIVER when you want to program
this receiver's operations, to SOURCE when you
want to program operations of other components.
1 While pressing MULTI OPERATION, press
HOME MENU.
The remote display shows SETUP MENU.
Use / to select 'MULTI OPERATE' or
2
'SYSTEM OFF' from the menu and press
ENTER.
If you selected Multi Operation (MULTI
OPERATE), the remote display prompts you for
an input function button.
If you selected System Off (SYSTEM OFF), go to
step 4.
3 Press the input function button for the
component that will start the multi-
operation, then press ENTER.
For example, if you want to start the sequence
by switching on your DVD player, press DVD.
Use / to select 'EDIT CODE', then
4
press ENTER.
To erase any previously stored multi-operations
(or shutdown sequences) select CLEAR CODE
above.
Use / to select a command in the
5
sequence, then press ENTER.
If this is the first command in the sequence,
select 1ST CODE. Otherwise, simply choose
the next command in the sequence. PRESS
KEY flashes after you press ENTER.
Note
1 • Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other
components (see Setting the remote to control other components on page 13 for more on this).
• Some units may take some time to power up, in which case multiple operations may not be possible.
• Power on and off commands only work with components that have a standby mode.
• Up to 5 commands can be programmed for System Off.
18
En
6 If necessary, press the input function
button for the component whose command
you want to input.
This is only necessary if the command is for a
new component (input function).
7 Select the button for the command you
want to input.
The following remote control commands can
be selected:
MAIN
RECEIVER SOURCE
ZONE2 3
MULTI
OPERATION
BDR
BD DVD DVR HDMI
NET RADIO
TV CD HMG ADAPTER
USB OPTION
iPod TUNER 1 2
MULTI CH
PHONO IN VIDEO CD-R
INPUT SELECT LIGHT
AUX
SOURCE
TV RECEIVER
CH VOL
VOL
TV CONTROL
INPUT MUTE MUTE
AUDIO VIDEO
PARAMETER PARAMETER
• You don't need to program the receiver to
switch on or off. This is done automatically.
With Pioneer components, you don't need to:
• program the power to switch off in a
shutdown sequence (except DVD
recorders);
These take priority in multi operations (not
shutdown).
TV CONTROL
INPUT MUTE MUTE
AUDIO VIDEO
PARAMETER PARAMETER
TUNE
TOOLS
LIST
TOP MENU T.EDIT
BAND GUIDE
PRESET PRESET
ENTER
CATEGORY
RETURN
HOME
MENU
TUNE
iPod CTRL PTY SEARCH
STATUS PHASE CTRL CH LEVEL
THX MPX PQLS MEMORY
AUTO/ALC/
DIRECT STEREO STANDARD ADV SURR
PGM MENU
SIGNAL SEL SLEEP DIMMER AUDIO
A.ATT SBch MCACC INFO
DISP
HDMI OUT
CH
D.ACCESS CLASS
ENTER
CLR