[Clear Memory]
Delete BD-Live data that are automatically
downloaded on the connected USB device.
Tip
•
On the connected USB device, a folder named "BUDA"
is automatically created to store the downloaded BD-Live
data.
®
[DivX
VOD Code]
®
Obtain the DivX
registration code or the
deregistration code.
Tip
•
Use this product's DivX registration code when you rent
or purchase video from www.divx.com/vod. The DivX
videos rented or purchased through the DivX
(Video On Demand) service can be played only on the
device to which it is registered.
[Version Info.]
Display the software version and the MAC address
of this product.
Tip
•
This information is needed for you to check if a latest
software version is available at the Philips website so that
you can download and install on this product.
[Restore Default Settings]
Reset all the settings of this product to the factory
settings, except for [Parental Control] setting.
22
EN
7 Additional Information
Update software
For software updates to enchance performance,
check the current software version of this product to
compare with the latest software (if available) at the
Philips website.
1
2
3
Update software via network
1
®
VOD
2
3
Update software via USB
1
2
3
4
5
•
Press
.
Select [Setup], and press OK.
Select [Advanced Setup] > [Version Info.],
and press OK.
Set up the internet connection (see "Get
started' > "Set up a network").
In the Home menu, select [Setup] >
[Advanced Setup] > [Software Update] >
[Network].
»
You are prompted to start upgrading
process if upgrade media is detected.
Follow the instructions on the TV screen to
confirm update operation.
»
When the software update is complete, the
player automatically turns off and on again.
Go to www.philips.com/support to check if
the latest software version is available for this
product.
Download the software into a USB flash drive:
a Un-zip the download, and make sure that
the un-zipped folder is named "UPG".
b Put the "UPG" folder in the root
directory.
Insert the USB flash drive to the
jack on this product.
In the Home menu, select [Setup] >
[Advanced Setup] > [Software Update] >
[USB].
Follow the instructions on the TV screen to
confirm update operation.
»
When the software update is complete, the
player automatically turns off and on again.
Note
Do not turn off the power or remove the USB flash
drive when software updating is in progress to prevent
possible damage of this product.
(USB)