3-1. How to enter the Service Mode
Service adjustments to this model can be performed using the
supplied Remote Commander RM-ED014.
1.
Turn on the power to the TV set.
2.
Press the following sequence of buttons on the Remote
Commander.
i+
5
(ON SCREEN
(DIGIT 5)
DISPLAY)
3.
The following menu appears on the screen (See Pic.1).
Pic.1
4.
Move to the corresponding adjustment item using the
' ' or ' ' arrow buttons on the Remote Commander.
5.
Press the '
' arrow button to enter into the required menu
item.
6.
Adjust the data value using the '
on the Remote Commander.
7.
To go back at any time press the '
Commander.
8.
Press the Red button or 'Menu' button on the Remote
Commander to quit the Service Mode when all adjustments
have been completed.
•
After carrying out the service adjustments, to prevent the
customer accessing the 'Service Menu' switch the TV set
OFF and then ON again.
SECTION 3 ADJUSTMENTS
+
I/
TV
+
(VOLUME +)
(TV)
' or '
' arrow buttons on
' button on the Remote
3-2. Service Menu Structure
The following description shows the items that can be
viewed and/or adjusted using the Service Menu.
3-2-1. Service General Menu
The following menu appears on the screen when you enter
the 'Service General Menu' (See Pic.2). This menu allows
you to view the product information, set the TV into Aging
Mode and perform Software Upgrade to the TV set.
Pic.2
3-2-2. Service Alignments Menu
The following menu appears on the screen when you enter
the 'Service Alignments Menu' (See Pic.3). This menu
allows adjustment of the TV picture levels. These adjustments
are set during manufacture and should not normally require
further adjustment.
Pic.3
- 10 -