Table of Contents
Advertisement
( Fujitsu SRS-1050
Softkeys
The softkeys are the four keys located just below the display. When you
press the KEY MENU button to their right, function labels appear on
line 2 of the display.
UNA
DATA
CLEAR
REG
Key Menu
1
2
3
4
Standard Softkey Layout
(The DATA softkey label appears only if you have the data model.)
Note: Softkey 1 also serves as the ENTER key (for entering
information as indicated in this User Guide).
Softkeys are a way of simplifying the phone and still supporting the
richness of ISDN features. These keys assume different functions
depending on the feature you are using, thus avoiding the need for a
large number of permanent function keys.
You can display the labels at any time without affecting the tasks you
are performing. The labels do not, however, have to be displayed for
these keys to work.
Timeouts
When you are setting up local features as described in Chapter 3, some
of the data entry displays have built-in timers. If you do not enter
information within six seconds, the display reverts to the menu for
selecting the feature you were setting up. You must reselect the feature
and start again.
Page 7
Advertisement
Table of Contents
