Suzuki ERTIGA Owner's Manual page 98

OTHER CONTROLS AND EQUIPMENT
Overhead rear air conditioning system
(if equipped)
EXAMPLE
(1)
(2)
To turn on the overhead rear air condition-
ing system, set the blower speed selector
of the air conditioning system to a position
other than "OFF" and set the rear blower
switch (2) to a position other than "OFF".
Move the knob (1) vertically or horizontally
to adjust the direction of airflow as desired.
If you need cold air to come out, turn on
the temperature selector with air condition-
ing switch. Refer to "Temperature selector
with air conditioning switch" in this section.
During operation of the air conditioner, you
may notice slight changes in engine
speed. These changes are normal, the
system is designed so that the compressor
turns on or off to maintain the desired tem-
perature. Less operation of the compres-
sor results in better fuel economy.
5-3
Description of Controls
(2)
(1) (4)
60MH028
Temperature selector with air condition-
ing switch (1)
This is used to select the temperature by
turning the selector.
Also, this is used to turn on and off the air
conditioning system by turning the selec-
tor. To turn on the air conditioning system,
turn the selector to a position other than
"OFF". When this selector is in the "OFF",
the air conditioning system will not turn on.
NOTE:
During operation of the air conditioner, you
may notice slight changes in engine
speed. These changes are normal, the
system is designed so that the compressor
turns on or off to maintain the desired tem-
perature.
Less operation of the compressor results
in better fuel economy.
Blower speed selector (2)
This is used to turn on the blower and to
select blower speed by turning the selec-
(3)
tor.
58MST0513
Air flow selector (3)
(c)
(b)
(a)
This is used to select one of the functions
described below.
(d)
(e)
63J048
60MK0-14E