Suzuki ERTIGA Owner's Manual page 62

BEFORE DRIVING
When the display (C) shows the driving
range, you can change the unit of tempera-
ture.
To change the unit of temperature, while
pushing and holding the trip meter selector
knob (1), turn the indicator selector knob
(2).
EXAMPLE
(Initial
setting)
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the unit of temperature
will be reinitialized. Change the unit again
to your preference.
2-47
Transaxle selector position indicator
(for automatic transaxle vehicles)
(b)
EXAMPLE
When the ignition switch is in the "ON"
position, the display (B) indicates the gear
position (b).
For details on how to use the transaxle,
refer to "Using the Transaxle" in the
"OPERATING YOUR VEHICLE" section.
Trip meter / Instantaneous fuel con-
sumption / Average fuel consumption /
Driving range
68LM259
When the ignition switch is in the "ON"
position, the display (C) shows one of the
following five indications, trip meter A, trip
meter B, Instantaneous fuel consumption,
Average fuel consumption or Driving
range.
To switch the display indication (C), push
the trip meter selector knob (1) or the indi-
cator selector knob (2) quickly.
EXAMPLE
(c)
68LM260
(d)
(e)
(f)
(g)
71LMT0204
60MK0-14E