Shooting (P, S, A, M) - Nikon D5600 Reference Manual

Flicker or banding appears during live view or movie recording: Choose an option
for Flicker reduction that matches the frequency of the local AC power
supply (0 268).
Bright bands appear during live view or movie recording: A flashing sign, flash, or
other light source with brief duration was used during live view or movie
recording.
Menu item can not be selected: Some options are not available in all modes.

Shooting (P, S, A, M)

Shutter-release disabled:
• Non-CPU lens is attached: rotate camera mode dial to M (0 308).
• Mode dial rotated to S after shutter speed of "Bulb" or "Time" selected
in mode M: choose new shutter speed (0 121).
• If white-balance bracketing is active, shutter release will be disabled
and viewfinder exposure-count display will flash if there is insufficient
space on memory card to record all images in bracketing sequence.
Insert new memory card.
Full range of shutter speeds not available:
• Flash in use (0 106).
• When On is selected for Movie settings > Manual movie settings in
the shooting menu, the range of available shutter speed varies with the
frame rate (0 169).
Can not select desired aperture: Range of available apertures varies with lens
used.
Colors are unnatural:
• Adjust white balance to match light source (0 140).
• Adjust Set Picture Control settings (0 155).
Can not measure white balance: Subject is too dark or too bright (0 147).
Technical Notes
345