F3: Assign Touch Fn - Nikon D5600 Reference Manual

f3: Assign Touch Fn

A touch-sensitive area of the monitor can be used to control the
camera after the monitor has turned off automatically. The
position of this "touch Fn" area varies with the position of the
monitor; the role it plays can be chosen from the options in the
table below. Slide your finger left or right across the area
indicated in the illustration to adjust the chosen option (note
that touch Fn is not available when the monitor is facing
forward). If you find that your face contacts the touch Fn area
when you look through the viewfinder, use the monitor in the
extended position.
Monitor in normal position
Option
Focus-point
#
selection
ISO
w
sensitivity
Active
!
D-Lighting
G button ➜ A Custom Settings menu
Touch Fn area
When an option other than e (Auto-area AF) is
selected for AF-area mode, you can slide a finger
over the touch Fn area to position the focus point
(0 90).
Slide a finger left or right over the touch Fn area to
adjust ISO sensitivity (0 107), up or down to turn
auto ISO sensitivity control (0 228) on or off (P, S, A,
and M modes only).
Slide a finger over the touch Fn area to adjust
Active D-Lighting (P, S, A, and M modes only;
0 136).
A Custom Settings: Fine-Tuning Camera Settings
Monitor extended
Description
255