Dolphin 7600 Series User Manual page 67

Add
Apply
Refresh
To Add an Active SSID to the Preferred Profile Table
An SSID needs to be in the Preferred Profile list to be edited.
1. Select an SSID in the Active SSID list and tap Add. The SSID moves to the Preferred Profile list.
If the SSID has the WEP Key turned on, the Settings window displays and prompts you to enter the WEP Method, Encryp-
tion Key, and Key ID.
2. In the Preferred Profile list, select the SSID and tap Edit
3. Follow the same process for creating a profile.
4. When configuration is complete, tap OK.
5. The SSID and its profile are added into the Preferred Profiles list.
If you're adding an SSID with the WEP Key turned off, the Settings window does not display and the SSID is added directly
to the Preferred Profile table.
To Create a New Profile
In the Preferred Profiles section, tap the New button
Dolphin® 7600 Series User's Guide -
Second Draft Preliminary
Column This column displays...
Mode The mode of operation
=AP
=Peer station
Channel The channel and applied WEP method, if any.
=WEP Key-On
=WEP Key-Off
SupRate Supported data rate of the AP or the peer station.
BSSID BSSID or MAC Address of the AP or the peer station.
(MAC Addr)
Tap this button to add an Active SSID to the Preferred Profiles list. Select and active SSID in the list,
tap Add, and the profile moves to the Preferred Profiles list.
Tap Apply to associate your station with a selected SSID. The SSID selected can be in the Preferred
Profile or Active SSIDs lists. When applied, the Status tab opens displaying the status of the wireless
connection. If the association fails, a search for another AP in the Preferred Profile list automatically
takes place, and the radio attempts to associate with the station, in order of preference.
Tap Refresh to start a new search for all available APs or peer stations in the vicinity.
.
. Complete the Network Profile and Authentication tab windows.
Rev (a) 8 - 5