Vertex Standard EVX-S24 Operating Manual page 29

Stun
You may stun a selected radio in your fl eet (temporarily
disable from transmitting/receiving) forcibly by remote
control.
 Press the assigned PF key to activate the MDC1200
Call feature.
 Press the [  ] / [  ] keys to recall the Contact Alias you
wish to stun, then press the [ MODE (
 Press the [  ] / [  ] keys to select "STUN".
 Press the [ MODE (
)] key to transmit the stun com-
mand to the designated radio (the display will indicate
"-CAL IN-"). If the designated radio is alive, the des-
ignated radio transmits the ACK command and stuns
it. If not, your radio's display indicates "-NO ACK-",
the disabling command did not succeed.
The Stunned radio will revive by the "Revive" function
described previously.
W O
HEN PERATING IN THE
 Press the assigned PF key to activate the Call feature.
 Press the [  ] / [  ] keys to select the Contact Alias.
 If the TX ID Type of the selected Contact Alias is
"Group Call" or "All Call" (indicates the " " or
" " icon on the display), press the [ MODE (
key twice to display the ID code of the selected
Contact Alias.
EVX-S24 O M
PERATING
A
DVANCED
)] key.
D M
IGITAL ODE
ANUAL
O
PERATION
 If the TX ID type of the selected Contact Alias is
"Individual Call" (indicates " " icon on the dis-
play), you may perform the "Call Alert", View ID,
"Radio Check", "Revive", or "Stun" operation.
Call Alert
You may call the selected Contact Alias.
 Press the assigned PF key to activate the Call feature.
 Press the [  ] / [  ] keys to recall the Contact Alias you
wish to contact, then press the [ MODE (
 Press the [  ] / [  ] keys to select "CALL ALT".
 Press the [ MODE (
command to the designated radio. If the designated
radio is active, the designated radio transmits the ACK
command and displays your ID number on the display.
If not, your radio's display indicates "-NO ACK-".
View ID
You may confirm the ID code of the selected Contact
Alias.
 Press the assigned PF key to activate the Call feature.
 Press the [  ] / [  ] keys to recall the Contact Alias
you wish to confirm the ID code, then press the
[ MODE ( )] key.
)]
 Press the [  ] / [  ] keys to select "VIEW ID".
 Press the [ MODE (
the selected Contact Alias.
)] key.
)] key to transmit the Call Alert
)] key to display the ID code of
27