Amp Control; Crsc (Clean Reception System Circuit); Auxiliary Input Display Setting & Station/Disc - Kenwood KDC-MP8029 Instruction Manual

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the
unit.
1
Select AMP Control mode
Push the Control knob to [FM] or [AM].
Select the "AMP Control" display.
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Contol knob to [FM] or [AM].
• For the details of the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Push the Control knob to [4] or [¢].
5
Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.
In FM reception
CRSC (Clean Reception System
Circuit)
Temporarily have reception switched from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Display
"CRSC : ON"
"CRSC : OFF"
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.
Setting
The CRSC is ON.
The CRSC is OFF.
Auxiliary Input Display Setting &
Station/Disc Naming
For selecting the display when switched to
Auxiliary input source. For the Station/Disc
Naming refer to the <Station/Disc Naming (SNPS/
DNPS)> (page 20).
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX"/"AUX EXT" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3
Select Auxiliary input display setting mode
Push the Control knob to FM] or [AM].
Select the "Name Set" display.
4
Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
5
Select the Auxiliary input display
Push the Control knob to [4] or [¢].
Each time the button is pressed, the display
switches as shown below.
• "AUX"/"AUX EXT"
• "DVD"
• "PORTABLE"
• "GAME"
• "VIDEO"
• "TV"
6
Exit Menu mode
Press the [MENU] button.
• When operation stops for 10 seconds, the name at
that time is registered, and the Auxiliary input display
setting mode closes.
• The Auxiliary Input Display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S210A is used.
35
|
English