Dolphin 7400 User Manual page 71

In the "Locate Drive Files" dialog, check the CD-ROM drives check box and insert
the driver CD provided into the CD tray on your PC. There are sub-directories in
this directory for each type of Windows OS supported. Select stirusb.sys file in
the correct sub-directory for your PC:
•
w2k - Windows® 2000
•
win98 - Windows® 98
•
winme - Windows® Me
At this point, the hardware is installed and operating. You may need to reset your
PC to complete the installation process. You can verify that the USB driver is
functioning by watching the COMM LED on the USB home base. It should be
flashing red approximately every three seconds.
Once the USB HomeBase is installed, you can use ActiveSync to connect to a
Dolphin 7400. These instructions assume that ActiveSync v3.1 is installed on your
PC.
In the ActiveSync connection settings, add check mark to "Allow serial cable or
infrared connection to this COM port" and select "Infrared Port (IR)" for the COM
port as shown below. Do not check "Allow USB connection with this desktop
computer". It has no effect for the USB HomeBase.
•
•
•
71
•
•
•