Dolphin 7400 User Manual page 21

Configuring the Modem
If your Dolphin 7400 hand held computer is equipped with a modem, follow these
configuration instructions. Use the Dolphin 7400 mouse utility to navigate through
the configuration process if your terminal does not have a touchscreen. For more
information about the mouse utility, see Navigating the Keyboard in Chapter 4.
1. From the Start menu, select Programs>Communication>Remote Networking.
2. Select Make New Connection. Type in the name for the connection. Select
Dial-Up Connection and touch Next.
3. Select the modem from the drop-down menu, CIRRUS LOGIC 56K MODEM
and then touch Configure.
4. Set the option on Port Settings tab as shown below and then touch OK.
5. Touch Next and enter the country code, area code and phone number in the
appropriate fields. Touch Finish and the terminal will return to the Connection
window.
For information on using the modem, see Using the Modem in Chapter 4.
5 Verifying that Dolphin 7400/7450 is Working Properly
After the main battery pack is charged and installed and you have calibrated the
the screen and set the time and date, the Dolphin 7400 terminal is ready to use.
Choose the IMAGE DEMO or SCAN DEMO to verify that the terminal is operating
properly.
•
•
•
21
•
•
•