Dolphin 7400 User Manual page 22

Touchscreen-equipped terminals:
To take an image:
1. Select IMAGE DEMO.
2. Press F1 (red key + Q) to view the set-up utility for the IMAGE DEMO.
3. Press the <ON/SCAN> button and the image you take will appear on the termi-
nal's screen.
4. Touch <ESCAPE> to go back to the main menu.
To scan a bar code label:
1. Select SCAN DEMO.
2. Press F1 (red key + Q) to view the set-up utility for the SCAN DEMO.
3. Press the <ON/SCAN> button, aim the terminal at a bar code and the red
SCAN LED will illuminate. The green SCAN LED will illuminate and the termi-
nal will beep when a good scan is obtained. Information about the bar code
scanned will appear on the screen.
4. Press <ESCAPE> to exit the demo and return to the main menu.
Terminals without touchscreens:
To take an image:
1. Using the Cursor keys, navigate down to the IMAGE DEMO button and press
an <ENTER> key.
2. Press F1 (red key + Q) to view the set-up utility for the IMAGE DEMO.
3. Press ON/SCAN button and the image you take will appear on the terminal's
screen.
4. Press <ESCAPE> to go back to the main menu.
To scan a bar code label:
1. Using the Cursor keys, navigate down to the SCAN DEMO button and press
an <ENTER> key.
2. Press F1 (red key + Q) to view the set-up utility for the SCAN DEMO.
3. Press ON/SCAN button, aim the terminal at a bar code and the red SCAN LED
will illuminate. The green SCAN LED will illuminate and the terminal will beep
when a good scan is obtained. Information about the bar code scanned will
appear on the screen.
4. Press <ESCAPE> to go back to the main menu.
•
•
•
22
•
•
•